80/105 LANDCRUISER - WELD ON REAR RAISE BRACKET - KIT
80/105 LANDCRUISER - WELD ON REAR RAISE BRACKET - KIT
80/105 LANDCRUISER - WELD ON REAR RAISE BRACKET - KIT
SKU: SC-001890
Toyota / Land cruiser / 80 Series
Toyota / Land cruiser / 105 Series
Here is our 80/105 Rear Weld on Panhard Raise Bracket Kit, used to replace your factory rear panhard mount with our new bracket which raises the panhard mount by 75mm and over by 40mm.
With lifted Landcruiser 80/105s this bracket will greatly improve the ride and handling of your vehicle both on and offroad. On a 5 link the roll axis is accepted as the centre of the panhard; by raising this it lessens the body roll feeling of your vehicle. By having the panhard starting in a flatter neutral position at ride heights is means the axle is pulled left to right less through its range of travel.
For example an average 105 series with 3” lift with our rear panhard raise fitted the roll axis is raised approx. 40mm and the lateral movement of on highway of up / down travel of 50mm each way reduces the left to right pull by approx. 8mm. This might not sound like much but genuinely makes a big difference behind the wheel both on and off road.
With moving the upper mount across only 40mm it will cycle without panhard hitting the chassis so no changes to bump stops should be required.
This is a weld on solution, so does not suit everyone you will need an adjustable rear panhard rod to fit this kit.
Kit includes:
- 4 x 6mm Laser Cut Plates
- 1 x New Panhard Bolt
Same kit we used in Shauno's Sooty
Items that weigh over 30 kg are generally shipped on a skid to comply with workplace health and safety requirements. Suspension kits generally weigh around 100kg so we ship them on a skid so nothing gets lost. We can only ship skids to business addresses with access to forklift or the carriers local depot for you to pickup.
Cancellations
No order may be cancelled, modified or deferred without the prior written consent of the Company (which is at the Company’s sole discretion). If such consent is given it is, at the Company’s election, subject to the Company being reimbursed all losses, including loss of profits, and paid a cancellation fee (being not less than 20% of the invoice price of the Goods).
Goods not returnable: Any goods specially made, including items cut to length. Any goods made, or purchased to a firm and irrevocable order or any goods altered or damaged by the Purchaser cannot be returned under any conditions.
WHEN do items need to be returned by?
Goods must be returned within 14 days of issuance of the Company's written consent.
WHERE do items need to be returned to?
Returned goods shall be returned to the Company's place of trading or such other place nominated by the Company.
HOW do you return items?
Returned Goods must be clearly marked with the Return Authorisation Number or such orther reference provided by the Company.
SHIPPING for returns?
Original shipping rates are not refundable. The customer is reposnsible for packaging and shipping of returned goods. Goods returned in a damaged condition are not refundable.
CREDIT for returns?
Credits for returned goods (net of cancellation fees) shall be made by direct deposit or crediting the credit card used for theoriginal purchase.
Instore return option?
Goods can be returned in person to the Company's trading address in person during normal business hours.
Packing materials?
Goods shipped for return must be packaged in a similar manner to how it was shipped to you so that damagin in transit does not occur.